Gas Torch Porpane Torch For Install The Heat Shrinkable Sleeves Fire torch

A gas torch or blow torch is a torch that uses a fuel to heat objects. 

1. For disposable gas cylinder (Europe cylinder specification)
2. Portability
3. Hose with solid brass hitting pin point burner tip
4. EN521 European 7/16’’ threaded Mapp, and M10x1 / M12x1 inlet connection oxygen
5. Two separate flame adjustment knob on the torch handles
6. Accessories are optional
7. Certificated hose meets EN1327 standard
8. Color box packed
9. Flame arrestor

Why use gas torch for installation the heat shrinkable sleeves ?

1. In order to guard against oxidate of the steel body during the preheat after the burnishing , it is better to make preheat up to 60℃

-80℃ first and then to make rust removing.- Here the workers will use gas torch to preheat it.

2. Use Fire torch to Make preheat on the patched rim with medium firearms.Note: The preheat should be even. The temperature is at70- 80℃. If available, the medium-frequency resistance heater can also be used, to pre-heat the pending anti-corrosion areas to 80℃.( the temperature is measured with a thermometer) -here the workers will use gas torch too.

3.When installation the heat shrinkable sleeves, it will use fire torch always, when heat the heat shrinkable materials, the sleeves will start to shrinkable and wrap the steel pipes well.

The heat shrinkable sleeves application tools